Xreal is back at it again with another set of augmented reality glasses. Today, the company officially announced the new One Series, the company’s most ambitious effort yet in the AR space. The One Series encompasses two products: the One and the One Pro.

At the heart of the One Series is a brand-new spatial computing co-processor, the X1, developed in-house by Xreal. According to the company, the new chip allows for smoother playback thanks to a low motion-to-photon (M2P) latency of 3ms when the glasses operate at 120Hz (according to Xreal, the typical industry measurement is around 20 ms). The company also touts its superiority over the $3,500 Apple Vision Pro, which has a 12ms M2P.

A lower M2P means you shouldn’t see any motion blur or visual lag, whether you’re using anchored or follow-screen modes. If you need a refresher, anchored mode is where the picture displayed to your eyes within the glasses stays stationary in front of you, even if you move your head from side to side or up and down. The follow mode is when the picture follows your head movements. So, if you look left or right, the picture moves and keeps up with your head tracking. The One Series can switch between these two modes using the red button on the bottom of the right arm of the glasses.

As with previous Xreal AR glasses, the One Series features two 1080p displays, giving you a full 32:9 aspect ratio for viewing content. On the Xreal One, you get a 50-degree field of view, giving you a nearly 21 percent greater viewing area than the preceding Xreal Air 2 I reviewed last year.

The new Xreal One and One Pro are currently available for preorder, priced at $499 and $599, respectively. The former will ship later in December, while Xreal says that the latter will arrive in early 2025.